Types of Door Locks for Patio Doors in Aylesbury
Sliding patio door in aylesbury is a fantastic way to bring more light into your home. They are also simple to maintain and secure from burglars.
A customer called in to discuss the possibility of installing a new lock on their front door. After a variety of options were discussed they chose to have a Yale night latch fitted and a set of new keys supplied.
Sash Locks
Sash locks are one of the most commonly used mortice locks, and they work by using a combination of latches and deadbolts. They are incorporated into the door's material and are operated using the use of a key. These locks are ideal for both front and back doors since they are secure. Sash locks come in different sizes that can be adjusted to any door thickness. They can also be fitted on UPVC and hardwood doors.
There are many different kinds of sash locks available The most popular are the five lever sash lock as well as the three lever sash lock. The mortice sash lock with five levers is among the most secure options and is in compliance with British Standards for thief-resistant locks. It also comes with an face plate and striker that can be finished to match your door knobs or handles. The three-lever sash lock a less secure option however it still offers an adequate level of security for domestic use. It is simple to modify, as it has smaller levers. It can also be used on any door that is internal.
Another type of sash lock is the rim-profile the sash lock. They are similar to sash lock, however they are different in that they do not fit into the door. Instead, they attach to the exterior of the door and can be secured with keys from both sides. They are suitable for interior doors where privacy is needed, such as bathrooms and bedrooms.
A window lock with a sash is a great option to protect your home from burglars and ensure your children's safety. They prevent the sash from opening too much, ensuring that your children cannot escape from the window. They come in a range of sizes, ranging from 3 inches to 5 inches and are a great option for any window restoration project.
Sash window locks are easy to install and can be installed at home by any D.I.Y enthusiast. To begin, you'll need to use a pencil and ruler to mark the central point at which you want to put the lock. Once you've marked the central point it is time to remove the screws that held the sash. After removing the screws you must clean any debris or paint that may remain. Install the new fastener.
Mortice Locks
A mortise lock is a relatively large mechanism that is able to fit into the interior of the door. These locks are usually found in older structures and also in newer and more luxurious residential construction. You can still purchase a mortise-style lock in hardware stores. It's a sturdy and secure choice. It's perfect for securing high traffic areas like hospitals or schools.
It is impossible to use a mortise locking mechanism with a standard knob or handle since the bolt will only retract when a key is inserted. The bolt will also not be able move until the knobs are turned, therefore it's crucial that you choose the right knob and handle that fit into the lock case perfectly. Refer to the lock diagram if you're unsure.
Mortice locks are usually constructed of strong materials that can withstand a great deal of wear and tear. They are extremely difficult to break, even under extreme pressure. This durability makes them an excellent choice for doors in high-traffic areas that are likely to be subjected to lots of abuse, such as hospitals and schools.
As with rim locks, mortise deadlocks can be found in different styles and security levels. For example there are three-lever mortice sashlocks which are typically used for doors that are internal such as bedrooms and inner porches. They aren't as secure as mortice locks with five levers due to the fact that they have less levers.
If you're thinking of fitting a mortice lock on an exterior door, it's important to make sure that the lock you buy is British Standard approved. This will ensure that your door is safe and stop intruders entering your home and stealing valuables.
A mortise lock operates by locking into a pocket that is cut into the inside of the door frame. The pocket is referred to as a 'mortise' and the lock is held in place by an 'lock case' fixed to the door frame using screws or nails. A hard collar is usually placed on the outside of the lock to prevent it from being removed with a pipe-wrench.
Cylinder Locks
Cylinder locks are a common choice for uPVC doors and are also available for composite and timber doors. These locks consist of two components which are the lock that triggers the latch or deadbolt, and the cylinder which controls it. The design allows both components to be replaced separately when needed. This is a great option if one of the components isn't working properly or if you want to upgrade to a higher security cylinder.
The lock cylinder is the component that receives the key, and it has a series of pins within. When the correct key is inserted into the lock cylinder the notches on it push the pins to different levels. This allows them to rotate and open the doors. If you insert an incorrect key the notches will not align and the majority of pins will remain at their normal position.
There are many types of cylinder locks including pin tumblers with basic designs to high-security variants that can be resistant to multiple lock picking methods. The more pins inside a cylindrical lock, the more difficult it will be to pick them. Standard cylinder locks usually contain six pins. Higher security versions can have as many as thirteen pins. window doctor near me are also called "security pins". There are many security pins available, including spool pins that have narrow waists that looks like a cotton spool and serrated pins with one or more narrow grooves cut into them.
A cylinder lock is much easier to install than mortise locks as it does not require the door frame to be drill. It is still an excellent idea to have the door frame measured and fitted by an expert to ensure it is positioned correctly. If your door isn't square, you will have to select an offset cylinder.
Cylinder locks offer a superior level of security and are also less expensive than smart locks. They are an excellent option for homes with less protection or for those who want to lock their home fast. They are particularly efficient if the door has a hole pre-drilled for the lock.
Mullion Locks
A mullion is a central part of a double doorway that divides it into two sections, allowing the other side to be used as a single opening. It can be fixed, or removable. Mullions are available in wood, metal or plastic. They can be used in conjunction with mortise or rim locks to exit the lock. They increase the security of double doors as well as provide a wider exit than vertical rod devices. They are also suitable for high use, hurricane and fire-rated doors.
During construction, a mullion is likely to be welded to the head of the frame, and then fixed to the ground. Some mullions can be removed. This makes them an ideal option for commercial projects, where doors' locations may change frequently. For example, if a business owner plans to build an employee entrance at the back of their building, they can simply remove the mullion to allow deliveries and furniture to pass through the door.
Conventional mullions require the removal of bolts or screws from fittings that are inserted into the floor and on top of the door frame. This is often lengthy and labor intensive process that requires two people. Over time, repeated removals may cause the fittings and mullions loosen. Furthermore, if the mullion is not in position, carts, gurneys and large machinery can't easily traverse the doorway.
A keyed removable door mullion was designed to address this issue. It permits the removal of a mullion easily and quickly from the top bracket by using the rim cylinder. This is useful when a large, unobstructed opening in the door is required. The PDQ 9300 Series removable mullions are specifically designed to work with the 6300/6400 Series Rim Exit Devices that are mounted on pairs of doors. They also enable the top bracket of the mullion to be lifted from the upwardly extending protrusions 42 and 43 on an under fitting 20 that is permanently fixed to the floor 14. The latch then releases and the mullion is temporarily removed. The mullion will be automatically engaged the latch once it is returned.